eCom Supreme Mod Battery Set - Mod Sets
eCom Supreme Mod Battery Set The Joyetech eCom Supreme Mod Battery Set contains: 1 x 2200mAh Battery with OLED display 1 x Micro-USB Cable 1.5m 1 x USB Power adapter 220V 1A Fast-charging power 1 x User manual eCom Supreme 1 x Warrant..
eCom Supreme Mod Battery Set
The Joyetech eCom Supreme Mod Battery Set contains:1 x 2200mAh Battery with OLED display
1 x Micro-USB Cable 1.5m
1 x USB Power adapter 220V 1A Fast-charging power
1 x User manual eCom Supreme
1 x Warranty Card
Output wattage: 30W max
Output Voltage: 8V max
Supportive Atomizer Head resistance: 0.5ohm min
Output mode: VV Mode & VW Mode
Color: Black, Silver
eGo Adaptor: 19mm*12.5mm
How to use
Power on and off: Press the button for 5 times in quick succession, the button light will flash 5 times to indicate eCom Supreme is ready for use. In the same way, eCom Supreme will be powered off after 5 presses.
VV mode (3V-8V): In this mode, voltage output can be adjusted by rotating the regulation ring clockwise or counterclockwise. The real-time voltage(V) will be displayed on OLED screen.
VW mode (2W-30W): In this mode, wattage output can be adjusted by rotating the regulation ring clockwise or counterclockwise. The real-time wattage(W) will be displayed on OLED screen.
Mode selection: When the device is in power-on state, press the bottom for 3 times to finish the mode selection.
Plug the USB cable to the eCom Supreme, and connect it to the wall adaptor or other power source such as a computer. (it can be used whilst on charge) It takes about 3 hours to fully charge the eCom Supreme through the 1A USB Cable and about 5 hours through 0.5A USB Cable.
Over 10s Protection: When you keep pressing the button for over 10 seconds, the output will shut off and the OLED screen will reflect “Over 10s Protection”.
Atomizer Detection: When eCom Supreme does not detect the atomizer, the OLED screen will display “No Atomizer Found”.
Atomizer Resistance Detection: When the atomizer resistance is lower than 0.5ohm, the OLED screen will display “Atomizer Low”.
Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the OLED screen will reflect “Atomizer Short”.
Low-voltage Protection: When the voltage of battery is below 3.3V, the battery will be locked and refuse to be restarted.
Low power Alert: If the battery’s power is low, the OLED screen will display “Power Low”. When the battery detects the power again, the battery will be locked and display “Power Low Lock”.
Battery Short-circuit Protection: When battery short-circuit occurs or output beyonds the load capacity, the OLED screen will display “Protection”.
1. Only have your eCom Supreme repaired by Joyetech. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the eCom Supreme in high temperatures or damp conditions, as this may damage the device. The appropriate operation temperature is within 0℃ to 45℃ while charging and -10℃ to 60℃ while in use.
3. Do not attempt to combine the eCom Supreme with parts from other brands of e-cigarettes. If it is damaged in this way, Joyetech will not take responsibility and your warranty will be void.